Showing all 93 results

Show sidebar
Show 48 96
Need help?

Phone: 418-908-0697

Toll free: 1 855-908-0697

Fax: 418-878-1573

email: [email protected]

Magnetizing Block for Tools

, ,
SKU: RA-2184
TOTALLY COOL! MAGNETIZE YOUR TOOLS! Here is a way to get around the fact that the type of steel used to make pliers and driver blades cannot be permanently magnetized. This is the easy and efficient way to continuously provide a magnetic charge to drivers, tweezers and pliers to pick up those small screws and findings. (Tools not included)

Temple angling pliers PI-107/S

,
SKU: PI-107/S

Deblocking Pliers

SKU: PI-120/B
Deblocking Pliers for INDO-HOYA-NIDEK Deblocking Pliers

Parallel Pliers

,
SKU: PI-250
Parallel jaw for even pressure distribution

Pliers and Tools Rack

,
SKU: RA-110
PLIERS AND TOOLS RACK Rack for pliers and tools, vanished wood. Dimensions: 21 x 11 x 12.5cm Approx. 7 pliers

Rimless Mounting Kit

,
SKU: PI-330
Including : Mounting pliers, dismounting pliers, cutting pliers for plastic bushings, scriber.

Replacement Screw for the Extractor of PI-T208/B

,
SKU: PI-T208/13

Extractor for PI-T208/B

,
SKU: PI-T208/11

Replacement Jaws for PI-T208/B

, ,
SKU: PI-T208/01

Replacement Jaws for PI-V5710

, ,
SKU: PI-V775J

Replacement Jaws for PI-V5720

, ,
SKU: PI-V5720J

Replacement Jaws for PI-V769

, ,
SKU: PI-V769J

Replacement Jaws for PI-154

, ,
SKU: PI-154/1

Replacement Jaws for PI-T233/B

, ,
SKU: PI-T233/1

Replacement Jaws for PI-V5762

, ,
SKU: PI-V5762J

Replacement Jaws for PI-V055

, ,
SKU: PI-V055J

Replacement Jaws for PI-V5765

, ,
SKU: PI-V5765J

Replacement Jaw for PI-V5775

, ,
SKU: PI-V5775J

Replacement Jaws for PI-V053

, ,
SKU: PI-V053J

Replacement Jaws for PI-V5764

, ,
SKU: PI-V5764J

Replacement Jaws for PI-V808

, ,
SKU: PI-V804

Replacement Jaws for PI-V809

, ,
SKU: PI-V809J

Replacement Jaws for PI-T193/B

, ,
SKU: PI-T193/1

Replacement Jaws for PI-T198/B

, ,
SKU: PI-T198/1

Replacement Jaws for PI-V702

, ,
SKU: PI-V702J

Replacement Jaws for PI-V710

, ,
SKU: PI-V710J

Soft Lenses Tweezers

, ,
SKU: BR-A6605
SOFT LENSES TWEEZERS

Push-On Nose Pads Removal Tweezers

, ,
SKU: BR-T299
PUSH-ON NOSE PADS REMOVAL TWEEZERS

Self-Closing Screw Holding Tweezers

, ,
SKU: BR-732
SELF-CLOSING SCREW HOLDING TWEEZERS

Screw Holding Tweezers with Locking Ring

, ,
SKU: BR-108
SCREW HOLDING TWEEZERS WITH LOCKING RING

Screw Holding Tweezers with Locking System

, ,
SKU: BR-151
SCREW HOLDING TWEEZERS WITH LOCKING SYSTEM

Tweezers with Very Fine Points

, ,
SKU: BR-115
TWEEZERS WITH VERY FINE POINTS

Tweezers with Bent Serrated Points

, ,
SKU: BR-T110
TWEEZERS WITH BENT SERRATED POINTS Stainless steel.

Screw Holding Tweezers (Narrow Points)

, ,
SKU: BR-T106
SCREW HOLDING TWEEZERS (NARROW POINTS) Stainless steel.

Screw Holding Tweezers

, ,
SKU: BR-T105
SCREW HOLDING TWEEZERS Stainless steel.

Screw Holding Tweezers, Bent Noses

, ,
SKU: BR-V731
SCREW HOLDING TWEEZERS, BENT NOSES Stainless steel.

Bench Block

,
SKU: ET-V210
BENCH BLOCK

Plier Rack

,
SKU: RA-117
PLIER RACK Plier rack in stainless steel. Width 210mm. Approximatively 8 pliers. Pliers not included  

Pliers Rack

,
SKU: RA-121
PLIERS RACK Pliers rack with stainless steel rods and crystal plates. Width 280mm. Approximatively 11 pliers. Pliers not included

Plier Rack

,
SKU: RA-120
PLIER RACK Plier rack with stainless steel rods and crystal plates Width 200mm. Approximately 8 pliers. Pliers not included

Wedges for Flex

,
SKU: EN-T153
WEDGES FOR FLEX 3 Wedges (6 different sizes) to hold the flex stretched.

Plier for Blocking

,
SKU: PI-152
PLIER FOR BLOCKING Plier for blocking flexible hinges

Flex Temple Mounting Pliers

,
SKU: PI-T208/B
FLEX TEMPLE MOUNTING PLIERS This kit enables to open the flex temple and then block it to enable the assembly

Bionic Thumb

,
SKU: PB
BIONIC THUMB The perfect tool for bending temples, eyewires, and endpieces. Use the large radius over your thumb or index

Tool Pouch

,
SKU: ASPI-1
TOOL POUCH Including: PI-V5776     Eyewire sizing pliers PI-V5762     Flat holding pliers PI-V5029    Long nose chain pliers PI-V053 

Side Cutting Pliers Superposed PI-T211/E

, ,
SKU: PI-T211/E
SIDE CUTTING PLIERS SUPERPOSED With large cutting capacity in vanadium chrome. PVC plasticized handles. Cutting capacity: Soft steel – Nickel

Side Cutting Plier Superposed PI-T210/E

, ,
SKU: PI-T210/E
SIDE CUTTING PLIER SUPERPOSED With large cutting capacity in vanadium chrome. PVC plasticized handles.   Cutting capacity: Soft steel –

Double Jointed End Cutters

, ,
SKU: PI-V218
DOUBLE JOINTED END CUTTERS Superior strength. Suitable for stainless steel and titanium. Tungsten Carbide Blades. Compound action and return spring.

Side Cutting Pliers

, ,
SKU: PI-T139/E
SIDE CUTTING PLIERS Superposed, with plastic sheathed and return spring. Cutting capacity : stainless steel screws up to 1.6mm diameter.

Premium Stainless Steel Cutter

, ,
SKU: PI-V211
PREMIUM STAINLESS STEEL CUTTER Highest quality Lindstrom cutter is strong enough to cut stainless steel. 140mm.

Oblique Cutter

, ,
SKU: PI-V062
OBLIQUE CUTTER Head has a pointed tip for getting into tight places. Nickel-plated carbon steel. Semi-flush cut. Not recommended for

Deblocking Pliers

,
SKU: PI-V713
DEBLOCKING PLIERS Features internal circular serrations for a secure grip when removing edging blocks. Slightly oval jaw ranges from 13.3mm

Meniscus and Bending Pliers

,
SKU: PI-V5710
MENISCUS AND BENDING PLIERS With nylon jaws for adjusting bridges, temple tips and temples. Practical to change the pantoscopic angle.

Nylon Eyewire Forming Pliers (Small)

,
SKU: PI-V5720
NYLON EYEWIRE FORMING PLIERS (SMALL) With jaws 18mm. 140mm.

Nylon Eyewire Forming Pliers

,
SKU: PI-V769
NYLON EYEWIRE FORMING PLIERS With jaws 23mm. 140mm.

Push-On Nose Pads Removal Pliers

,
SKU: PI-V050
PUSH-ON NOSE PADS REMOVAL PLIERS These stainless steel pliers remove push-on nose pads without altering arm adjustment. 127mm.

Long and Slim Jaw Pad Adjuster

,
SKU: PI-V1605
LONG AND SLIM JAW PAD ADJUSTER Slim, long 34mm jaw, useful for reaching into small spaces. Recommended for press-on nose

Thin Jaw Pad Adjusting Pliers

,
SKU: PI-V1601
THIN JAW PAD ADJUSTING PLIERS Extra narrow, 4.5mm, jaw facilitates adjustment on high minus lenses. Recommended for screw-on nose pads.

Long Bent Nose Pliers

,
SKU: PI-V7833
LONG BENT NOSE PLIERS 14 mm long curved jaws tapering to 1.5 mm at tip.

Bent Nose Pliers

,
SKU: PI-V329
BENT NOSE PLIERS Standard short, curved jaws for getting in those hard-to-reach spots.

Pliers for Driving Out Screws

,
SKU: PI-218/B
PLIERS FOR DRIVING OUT SCREWS For driving out screws and rivets

Screw Holding Pliers PI-V5250

,
SKU: PI-V5250
SCREW HOLDING PLIERS Stronger than tweezers. Dimple in jaws hold screw securely.

Screw Holding Pliers PI-111/S

,
SKU: PI-111/S
SCREW HOLDING PLIERS Dimple in jaws hold screws securely. 140mm.

Ultra-Slim Chain Nose Pliers

,
SKU: PI-V270
ULTRA-SLIM CHAIN NOSE PLIERS Lightweight pliers with cushion grips. Jaws taper from 4.8mm to 0.8mm. Designed for delicate work. Length

Slimline Chain Nose Pliers

,
SKU: PI-V1105
SLIMLINE CHAIN NOSE PLIERS Jaws taper from 6.7mm to 1mm. Length of jaws 23mm. Total length 127mm.

Long Flat Nose Pliers

,
SKU: PI-V724
LONG FLAT NOSE PLIERS Jaws are flat on the inside, rounded on the outside, and taper from 9mm to 1.5mm.

Long Nose Chain Pliers

,
SKU: PI-V5029
LONG NOSE CHAIN PLIERS Long 7mm jaws taper to 1mm to reach into small places. Jaw length 35mm. 146mm.

Flat and Round Nose Pliers

,
SKU: PI-V047
FLAT AND ROUND NOSE PLIERS Designed to change the curvature of pad arm loops. Flat jaw 7mm to 1,5mm ;

Tri-Points Pliers

,
SKU: PI-658
TRI-POINTS PLIERS Smooth round jaws for pad arm adjustment and reduces bridge distances on metal frames. Total length 120mm.

Slimline Round Nose Pliers

,
SKU: PI-V1205
SLIMLINE ROUND NOSE PLIERS For bending circular shapes and general repairs. Both jaws are rounded and tapered, from 4.5 mm

Pliers for Bending Temples

,
SKU: PI-154
PLIERS FOR BENDING TEMPLES Pliers with round nylon jaw and flat nylon jaw with grooves. 138mm

Narrow Pliers

,
SKU: PI-T233/B
NARROW PLIERS Two nylon jaws from 6mm to 3,5mm. Total length 140mm.

Flat Holding Pliers

,
SKU: PI-V5762
FLAT HOLDING PLIERS Two jaws from 8.5mm to 7mm. Total length 127mm.

Bracing Pliers

,
SKU: PI-V055
BRACING PLIERS For general use on both plastic and metal. Hold the front or end piece while using other pliers

Grooved Endpiece Adjuster

,
SKU: PI-V5765
GROOVED ENDPIECE ADJUSTER Useful for bending and adjusting thin metal frames and rimless end pieces. One tapered metal jaw and

Inclination Pliers PI-V5775

,
SKU: PI-V5775
INCLINATION PLIERS For adjustment of pad arms, temples and end pieces. One 10mm nylon jaw, one thin metal jaw. 140mm.

Inclination Pliers Slimline

,
SKU: PI-V053
INCLINATION PLIERS SLIMLINE For adjustment of pad arms, temples and end pieces. One 7mm nylon jaw, one round metal jaw.

Inclination Pliers PI-V5764

,
SKU: PI-V5764
INCLINATION PLIERS For adjustment of pad arms, temples and end pieces. One 10mm nylon jaw, one round metal jaw. 140mm.

Lens Axis Pliers

,
SKU: PI-V808
LENS AXIS PLIERS 24.5mm diameter jaw. Total length 190mm.

Lens Axis Pliers (Oval)

,
SKU: PI-V809
LENS AXIS PLIERS (OVAL) Two oval jaws 19 x 13mm. Total length 150mm.

Eyewire Sizing Pliers

,
SKU: PI-V5776
For testing the lens size inside the frame. 140mm.

Flaring Pliers

,
SKU: PI-172/S
With wide jaws. 135mm.

Finger Piece Pliers PI-V5040G

,
SKU: PI-V5040G
With holes in the jaw allowing to grip the hinge. 120mm.

Temple Angling Pliers PI-V5699

,
SKU: PI-V5699
Wide jaw with holes allowing to grip the hinge. 140mm.

Temple Angling Pliers PI-V5041G

,
SKU: PI-V5041G
Wide jaw with holes allowing to grip the hinge. 127mm.

Pantoscopic Angler PI-V5265

,
SKU: PI-V5265
PANTOSCOPIC ANGLER With wide and deep jaws to adjust and change the pantoscopic angle hinges and large plastic temples. 133mm.

Mounting Pliers PI-T193/B

,
SKU: PI-T193/B
With 2 plastic jaws including swiveling elements. 150mm.

Mounting Pliers PI-T198/B

,
SKU: PI-T198/B
With one fixed jaw and one swiveling jaw. 150mm.

Mounting Pliers PI-V702

,
SKU: PI-V702
With two fixed nylon jaws. 145mm.

Disassembly Pliers PI-V710

,
SKU: PI-V710
Use on pressure mount rimless style frames with « double barrel » retaining bushings. 146mm.

Extracting Bushings Pliers PI-V712

,
SKU: PI-V712

Front Cutting Pliers PI-T230

,
SKU: PI-T230
Front Cutting Pliers For cutting plastic bushings. With plastic sheathed handles. Does not allow to cut metal. 125mm.

Front Cutting Pliers PI-V711

,
SKU: PI-V711
For cutting plastic bushings Does not allow to cut metal