Showing 1–48 of 60 results

Hand Edger Sponge – Bottom

SKU: ME-T320/23
Bottom Sold per unit

Hand Edger Sponge – Top

SKU: ME-T320/21
Top Sold per unit

Single Rivet Setting Tool PR-08

SKU: PR-08
Single Rivet Setting Tool for PR-00 | Staking Tool (Clavulus)  

Double Rivet Setting Tool PR-09

SKU: PR-09
Double Rivet Setting Tool for PR-00 | Staking Tool (Clavulus)  

Solid Anvil Steel PR-13

SKU: PR-13
Solid Anvil Steel for PR-00 | Staking Tool (Clavulus)    

Pointed Punch PR-01

SKU: PR-01
Pointed Punch for PR-00 | Staking Tool (Clavulus)

Blunt Punch PR-02

SKU: PR-02
Blunt Punch for PR-00 | Staking Tool (Clavulus)

Peening Tool for Small Rivets PR-03

SKU: PR-03
Peening Tool for Small Rivets for PR-00 | Staking Tool (Clavulus)

Peening Tool for Large Rivets PR-04

SKU: PR-04
Peening Tool for Large Rivets for PR-00 | Staking Tool (Clavulus)

Single Pin Anvil PR-15

SKU: PR-15
Single Pin Anvil for PR-00 | Staking Tool (Clavulus)    

Round Hole Anvil PR-11

SKU: PR-11
Round Hole Anvil for PR-00 | Staking Tool (Clavulus)  

Oval Hole Anvil PR-12

SKU: PR-12
Oval Hole Anvil for PR-00 | Staking Tool (Clavulus)  

Double Pin Anvil PR-16

SKU: PR-16
Double Pin Anvil for PR-00 | Staking Tool (Clavulus)    

Base Pin PR-18 (for PR-17)

SKU: PR-18
Base Pin for PR-17 for PR-00 | Staking Tool (Clavulus)    

Piercing Punch Extractor PR-19

SKU: PR-19
Piercing Punch Extractor for PR-00 | Staking Tool (Clavulus)    

Anvil Ø 1.5mm for Driving Out Broken Screws

SKU: PR-70
ANVIL Ø 1.5MM FOR DRIVING OUT BROKEN SCREWS FOR STAKING TOOL PR-00

Anvil Ø 1.8mm for Driving Out Broken Screws

SKU: PR-71
ANVIL Ø 1.8MM FOR DRIVING OUT BROKEN SCREWS FOR STAKING TOOL PR-00

Anvil Ø 2.3mm for Driving Out Broken Screws

SKU: PR-72
ANVIL Ø 2.3MM FOR DRIVING OUT BROKEN SCREWS FOR STAKING TOOL PR-00

Single Piercing Punch Ø 1.2 PR-05

SKU: PR-05
Single Piercing Punch Ø 1.2 for PR-00 | Staking Tool (Clavulus)

Solid Anvil Nylon PR-14

SKU: PR-14
Solid Anvil Nylon for PR-00 | Staking Tool (Clavulus)    

Pins Ø 1.2 (10 pcs) PR-07

SKU: PR-07
Pins Ø 1.2 (10 pcs) for PR-00 | Staking Tool (Clavulus)

UV Flash Light

SKU: LP-UV
Photochromic lens testing flash light (batteries not included)

Lensometer Ink 30ml

Waterproof, bottle with twist off applicator cap. 30ml.

Double Piercing Punch Ø 1.2 PR-06

SKU: PR-06
Double Piercing Punch Ø 1.2 for PR-00 | Staking Tool (Clavulus)

Magic Green

Concentrated powder. Mix 30 ml powder with 4 liters water. Biodegradable. No ammonia.

Anvil Holder PR-10

SKU: PR-10
Anvil Holder for PR-00 | Staking Tool (Clavulus)  

Concentrated Cleaner for Ultrasonic Devices

SKU: MG-4042
Ultrasonics clean by compressing and releasing water molecules to scrub dirt particles loose. Use this surfactant to improve the scrubbing action and reduce the friction between water molecules. You’ll see better cleaning results faster. Use only a few drops per tank until a greater simmer. 4oz.

Narrow Face Anvil PR-17

SKU: PR-17
Narrow Face Anvil for PR-00 | Staking Tool (Clavulus)    

Breath Shield For Phoropters

SKU: PH-V
Polycarbonate breath shield, fits over most phoropters

Breath Shield For Pupillometers

SKU: PH-P
Plexiglass breath shield, fits over most pupillometers

Positioning device to drive out screws and rivets

SKU: PR-60
POSITIONING DEVICE TO DRIVE OUT SCREWS AND RIVETS FOR STAKING TOOL PR-00

Manual Pupilometer

SKU: PU-W2061
Keep one on hand as backup when your digital pupilometer is non-functional, or bring it with you for home service.

UV Tester

SKU: UV-400 TEST
This is simple use UV transmittance tester, from 360nm to 400nm, different transmittance level can be indicated on the device.

Ultrasonic Cleaning Device

SKU: US-V598
Dimensions: 20 x 12,5 x 14cm Tank capacity: 600ml Automatic shut off: 3 minutes Power: 35 watts 50/60Hz Weight: 780g

Tensiscope

SKU: POL-6600
This intrument makes the identification of strains on mounted lenses possible. Such strains can cause distorsions and in glass lenses,

Photochromic Tester

SKU: TP
This device makes it possible to check whether the lenses are indeed photochromic.

Ultrasonic Cleaning Device

SKU: US-DK90
Dimensions: 16,8 x 9,4 x 6,7cm Tank capacity: 900ml Weight: 1.15kg

Ultrasonic Cleaning Device

SKU: US-4810
Dimensions: 265 x 230 x 180mm Tank capacity: 2000ml Power: 135 watts 35,000Hz Weight: 2.2kg

Frame Warmer VE-G3903A

SKU: VE-G3903A
With concentrator Temperature from 80 °C to 110 °C

Frame Warmer VE-G3904

SKU: VE-G3904
With concentrator Temperature from 40 ° C to 150 ° C

Pupilometer

SKU: PU-M8403
Measures the pupilary distance Monocular: 22,5mm – 41mm Binocular: 45mm – 82mm Display per: 0,5mm Distance target: 30cm – infinity