Showing 1–48 of 60 results

Electronic Lensometer

SKU: LENTI-3
User-friendly graphic screen interface. 1. Measurement Range: Sph: 0 ~ +/- 25,00D (0,01 / 0,12 / 0,25D); Cyl: 0 ~

LENSMETER

SKU: LENTI-1.2
Outdoor reading with prism compensator.

Pupilometer

SKU: PU-5
Pupilometer Topcon PD-5

Disinfection Device

SKU: HB-UV
Machine with germicide UV lamp to sanitize glasses and trial frames : • Ideal for the optometrist and the optician

Lensometer

SKU: LENTI-1
Outdoor reading with prism compensator. Axis reading at 5 degrees. (Final sale)

Digital Pupilometer

SKU: PU-V600
Measures the pupilary distance Monocular: 22,5mm – 41mm Binocular: 45mm – 82mm Display per: 0,5mm Distance target: 30cm – infinity

M3 Frame Warmer

SKU: VE-M3
Made in Germany Maximum Temp 160 Celsius Size 275 x 135 x 145mm Voltage 115V, 60HZ Rated Power 450W

Hand Edger

SKU: ME-G3101A
Water feeding drop to drop Water is evacuated by a tubing Wheel width: 35mm Wheel equipped by: Rough #180 Fine

Diafine Type Front Hand Grinder

SKU: ME-L3102
Diafine Type Front Hand Grinder • Water feeding drop to drop •The water is drained into the container below •Wheel equipped by: -Rough #180 -Fine #240 -Finishing “V” •Dimensions: 45 x 35 x 30cm •Weight: 8kg

Staking Tool (Clavulus) PR-00

SKU: PR-00
The staking tool is used for different works on frames and temples (driving out, penning, setting, marking, etc…) Including 19

Salt Pan Frame Warmer

SKU: EQ-3106
Salt Pan Frame Warmer

Vispa Frame Warmer

SKU: VE-GFCA1200
Made in Italy Low noise With concentrator Temperature: ~ 120°C with closed lid ~ 150 °C with hot air concentrator

Pupilometer

SKU: PU-M8403
Measures the pupilary distance Monocular: 22,5mm – 41mm Binocular: 45mm – 82mm Display per: 0,5mm Distance target: 30cm – infinity

Frame Warmer VE-G3904

SKU: VE-G3904
With concentrator Temperature from 40 ° C to 150 ° C

Frame Warmer VE-G3903A

SKU: VE-G3903A
With concentrator Temperature from 80 °C to 110 °C

Ultrasonic Cleaning Device

SKU: US-4810
Dimensions: 265 x 230 x 180mm Tank capacity: 2000ml Power: 135 watts 35,000Hz Weight: 2.2kg

Ultrasonic Cleaning Device

SKU: US-DK90
Dimensions: 16,8 x 9,4 x 6,7cm Tank capacity: 900ml Weight: 1.15kg

Photochromic Tester

SKU: TP
This device makes it possible to check whether the lenses are indeed photochromic.

Tensiscope

SKU: POL-6600
This intrument makes the identification of strains on mounted lenses possible. Such strains can cause distorsions and in glass lenses,

Ultrasonic Cleaning Device

SKU: US-V598
Dimensions: 20 x 12,5 x 14cm Tank capacity: 600ml Automatic shut off: 3 minutes Power: 35 watts 50/60Hz Weight: 780g

UV Tester

SKU: UV-400 TEST
This is simple use UV transmittance tester, from 360nm to 400nm, different transmittance level can be indicated on the device.

Manual Pupilometer

SKU: PU-W2061
Keep one on hand as backup when your digital pupilometer is non-functional, or bring it with you for home service.

Positioning device to drive out screws and rivets

SKU: PR-60
POSITIONING DEVICE TO DRIVE OUT SCREWS AND RIVETS FOR STAKING TOOL PR-00

Breath Shield For Pupillometers

SKU: PH-P
Plexiglass breath shield, fits over most pupillometers

Breath Shield For Phoropters

SKU: PH-V
Polycarbonate breath shield, fits over most phoropters

Magic Green

Concentrated powder. Mix 30 ml powder with 4 liters water. Biodegradable. No ammonia.

Narrow Face Anvil PR-17

SKU: PR-17
Narrow Face Anvil for PR-00 | Staking Tool (Clavulus)    

Concentrated Cleaner for Ultrasonic Devices

SKU: MG-4042
Ultrasonics clean by compressing and releasing water molecules to scrub dirt particles loose. Use this surfactant to improve the scrubbing action and reduce the friction between water molecules. You’ll see better cleaning results faster. Use only a few drops per tank until a greater simmer. 4oz.

Anvil Holder PR-10

SKU: PR-10
Anvil Holder for PR-00 | Staking Tool (Clavulus)  

Double Piercing Punch Ø 1.2 PR-06

SKU: PR-06
Double Piercing Punch Ø 1.2 for PR-00 | Staking Tool (Clavulus)

Lensometer Ink 30ml

Waterproof, bottle with twist off applicator cap. 30ml.

UV Flash Light

SKU: LP-UV
Photochromic lens testing flash light (batteries not included)

Pins Ø 1.2 (10 pcs) PR-07

SKU: PR-07
Pins Ø 1.2 (10 pcs) for PR-00 | Staking Tool (Clavulus)

Solid Anvil Nylon PR-14

SKU: PR-14
Solid Anvil Nylon for PR-00 | Staking Tool (Clavulus)    

Single Piercing Punch Ø 1.2 PR-05

SKU: PR-05
Single Piercing Punch Ø 1.2 for PR-00 | Staking Tool (Clavulus)

Anvil Ø 2.3mm for Driving Out Broken Screws

SKU: PR-72
ANVIL Ø 2.3MM FOR DRIVING OUT BROKEN SCREWS FOR STAKING TOOL PR-00

Anvil Ø 1.8mm for Driving Out Broken Screws

SKU: PR-71
ANVIL Ø 1.8MM FOR DRIVING OUT BROKEN SCREWS FOR STAKING TOOL PR-00

Anvil Ø 1.5mm for Driving Out Broken Screws

SKU: PR-70
ANVIL Ø 1.5MM FOR DRIVING OUT BROKEN SCREWS FOR STAKING TOOL PR-00

Piercing Punch Extractor PR-19

SKU: PR-19
Piercing Punch Extractor for PR-00 | Staking Tool (Clavulus)    

Base Pin PR-18 (for PR-17)

SKU: PR-18
Base Pin for PR-17 for PR-00 | Staking Tool (Clavulus)    

Double Pin Anvil PR-16

SKU: PR-16
Double Pin Anvil for PR-00 | Staking Tool (Clavulus)